Cảm biến lực căng MB05B / MB05A / MB11B / MB11A / MB25B / MB25A / MB33B / MB33A / MB41 Nireco - Nireco Vietnam

Web Control Systems
Tension Control Systems

MB Tension Sensor

Overview　|　 Feature　|　 Specifications　|　

Overview

The MB Tension Sensor was designed to be used with a tension controller or tension meter.
It supports a wide range of products, with any tension range. The MB Tension Sensor has long been a strong seller, since sales were launched 20 years ago.

Feature

• Proven Track Record and Reliability
  Without bearings or similar mechanical contacts, and employing a non-contact detection method using a differential transformer, the MB Tension Sensor is highly responsive with low hysteresis. The compact size also requires little space for installation.
• Easy to Install
  The MB 05, 11, and 25 can be installed at any angle.
• Wide Selection of Sensors
  ①Full range available, from low tension (100 N full scale) to high tension (10,000 N full scale)
  ②All sensors have intrinsically safe construction.
• Overload Resistant
  The durable construction provides resistance to momentary overloads.

Specifications

Model	MB05B	MB05A	MB11B	MB11A	MB25B	MB25A	MB33B	MB33A	MB41
Rated tension (N)	(50)100	200	(50)100	200	500	1000	(2000) 3000	5000	10000
Roll displacement (μm/N)	2.38	1.19	2.63	1.30	0.44	0.22	0.071	0.045	0.023
Allowable roll weight (kg)	10	20	10	20	50	100	300	350	700
Allowable overload (N)	Ten times rated load
Unit weight (kg)	1.5		0.8		3.4		16.1		24
Tension resultant direction	Forward or reverse possible						Forward only (reverse impossible)
Mounting angle	Any desired angle
Supply voltage	DC +6V
Ambient temperature	-10 to +60℃
Applicable bearings	-
Note 1. Figures for rated tension and allowable roll weight are for double-sided detection. For single detection the above figures should be halved. 2. A 5m cable with connectors for connection to an amplifier is supplied. 3. MB05, MB11 and MB25 can be wall mounted with a bracket. If the unit is equipped with a bracket, "-W" is added to the end of its model name. e.g. MB11B-W. 4. Sensors with inherently intrinsic safety construction are also available. "S" is added to the end of the corresponding model name. e.g. MB11BS.